Turbo air recirculation valve location

ian_001ian_001 Junior Member

I have a 2013 2.0 biturbo which had an EGR failure. I blanked off the EGR and had a tune to delete the EGR in software. A couple of months later I started hearing a blow off valve type noise (quite noticable). I tested the intake system by plugging the air cleaner end and the other end where it goes into the motor. I then compressed the system with air, but could not find any leaks. I can't find any leaks in the turbo hoses. The ute drives normally and the boost gauge shows full boost when you would expect it. The noise only occurs when you would expect it to with a blow off valve.

My question is, where is the blow off valve (or dump valve or compressor bypass valve or whatever you want to call it) on the biturbo. I can't find any reference to it in the manual or any online resources.

Sign In or Register to comment.