Just had these bad boys arrive... Thanks Mark!
doinitsideways
Junior Member
in Net4x4
Looking forward to fitting these CalOffRoad UCA’s hopefully this weekend...
https://share.icloud.com/photos/0rc1kHSiX-yLBubKg5PPbQ0tw#Sunnybank,_QLD
Comments
Nice one man let us know how they go , are you running marks billies suspension too ?
Hopefully install this weekend.
yeah, have marks billy setup and his catch can kit.
2 hour install.
recommend a 16mm ratcheting ring spanner for removing the chassis bolts.
also, on the V6, the abs unit and some other guard make removing the bolts difficult. The rear I was able to slide out after just gently pushing against a brake line for it to get past, once out, you could pop that side out to get enough of angle on the bolt to clear the guard on the front bolt.
photos
https://share.icloud.com/photos/0wmvAaHn6bDlduujNNGIDxOOQ#Pacific_Fair
Nice one , much noticeable difference to steering and handling ?
Couldn’t notice a lot of difference in the steering. I did notice it felt less abrupt over speed humps.... however, that could have been the fact I forgot to relax the bushes of the stock UCA’s when I did my lift... so they were pulling up on the suspension the whole time...
off for a wheel alignment in the coming days... although they always feel better after one.